Sronewsdir:The !NewsDir application was not found - please locate it using the filer before continuing.
Supdate:Your !NewsDir is out of date... updating
Stoodeep:Warning: the path to your !Newsdir application is quite long. This may cause problems. It's recommended that !Newsdir be placed in or close to the root directory.
; debatch messages
Dstart:Starting batch...
Dtype:Processing new %0
Dcancel:Batch was cancelled by user. Auto-processing of new arrivals is temporarily disabled.
Ddelfail:Couldn't delete or move processed batch file %0
Dbadhead:The batch file header is not recognised (treating as %0).
Drecover:Continuing interrupted batch %0 from offset %1 bytes...
Dsavefail:Failed to save article %0 in group %1
Dpathfail:Failed to make path %0
Dnoprefetch:Transport prefetch command returned error: %0
CompFail1:Error reading file for decompression
CompFail2:Bad decompressed article size
CompFail3:Article decompression failed
CompFail4:Batch decompression of %0 failed (moving to debug area)
CompArt2:Compressing %0...
CompArt1:Decompressing file...
; groups
Gfull:Newsbase group database is full - please quit and restart to allow the addition of more groups.
Gcount:Please wait - counting groups...
Gfound:Found %0
Gtotal:%0 groups
Gsearch:Searching for groups...
Gcheck:Checking %0
Gscan:Please wait - scanning !NewsDir for group names...
Glast:Scanning group...
Gadd:%0 added
Gnoadd:%0 not added
Gcreate:Creating %0
Gbad:Invalid group specification "%0".
Gneg:Can't add or remove a negated group "%0"
Gnew:Enter new group
Gact:Group %0 is already active
Gnotact:Group "%0" not active
Gspecial:You can't remove Email, Folder or junk groups
Gremove:Remove group from database on disk as well?
Glist:Sending group list
Gfail:No such group
Gexp:Expiring %0
Gtime:Expiry time %0 days
Gdel:Deleting %0
Gcomp:Compressing %0
Gtest:Checking %0
Grename:Enter new name for %0
Gbadrename:Group rename failed
Gnextexp:Next expiry is scheduled for %0.
Gtrans:%0 (source), %1 (outgoing)
;nntp server
NNTPerr:TCP/IP error - stopping nntp server
NNTPbuildask:Do you really want to rebuild the master ID indexes? This may take some time.
NNTPdbon:You have enabled the master ID indexes - would you like to generate them now? This may take some time.
NNTPdboff:Would you like to delete any existing master ID indexes? They can be rebuilt later, if you re-enable the server databases.
NNTPdbbad:Master ID database may be corrupt - rebuild it now?
NNTPbuild:Building master ID index
NNTPbadbuild:Couldn't build new master ID index
NNTPnoton:Master ID database is not enabled.
TCPnostart:Couldn't start %0 server (%1)
Lrmgrp:Removed group %0 from transport %1
Ldelgrp:Deleted group %0 from database
Laddgrp:Added group %0 to transport %1
Lcrgrp:Created group %0
Echeck:Checking last expiry dates
Econfirm:Article expiry is due, would you like to proceed?
Ewarn:Warning - last expiry more than 5 days ago. Do you want to continue with the expiry?
;a articles
Aoverview:Making overview file
Aprogress:(%0%% complete)
Anone:No articles available
Afail:Sorry, can't give you that article - it was probably deleted or expired.
Afail2:Invalid group name or article number
Adel:Deleted %0
Anodel:Can't delete article
Amove:Folder operation okay
Apost:Article sent
Acancel:Cancelling %0
Anocancel:Can't cancel this article
Deny:Permission denied
Glock:Group locked; can't delete
SetupPass:Enter setup password
Iupdate:Updating index
Irebuild:Please wait: rebuilding index for %0
Iopen:Failed to open index %0 for update
Itmp:Failed to open index scratch file
Ibuffer:Couldn't claim memory for index update
Ibuild:Indexing %0
Iread:Reading headers
Idone:%0 of %1 files (%2%%)
Iper:Generating index: %0%%
Ifail:Couldn't make index file %0
Ireadfail:Error reading index for %0
Ibadrecord:Bad record found in index %0 (offset %1). The group should be reindexed.
Iwrfail:Couldn't update index (%0). Attempt to force file closure? (Yes to force, No to retry).
Imiscfail:Failed to open index %0 for update (%1).
Idelfail:Couldn't delete old index file %0
Oupdate:Updating overview
Oopen:Failed to open overview %0 for update
Otmp:Failed to open overview scratch file
; lock manager messages
LockFail0:Newsbase has lost the news database lock - switching to read-only mode!
LockFail1:News database is locked by task &%0
LockFail2:Couldn't lock news database
LockFail3:!Newsdir has been locked by another task, which is not running on this computer - should I assume the task has crashed, and remove the lock?
LockFail4:Couldn't unlock news database
LockRead:Running in read-only mode (news directory locked)
Readonly:Newsbase cannot perform that operation in read-only mode.
; newgroups
NGnone:Couldn't run newgroup utility
;Confirmations
Crem:Are you sure you want to remove %0
Cdel:Really delete %0 from database?
Cscan:Do you really want to re-check the database for all groups?
Cfullscan:Rebuilding the grouplist will lose configured expiry times. Do you want to continue?
Cexpmail:Please be certain you really want mail to be expired!
Cquit:Are you sure you want to quit? (%0)
Cquit1:Currently processing new arrivals
Cquit2:%0 active tcp/ip sessions
Cquit3:Configuration might be changed but unsaved
Ccancexp:Cancel expiry of all groups?
; busy messages
Bstart:Newsbase is still starting...
MaxAct:Newsbase can't process that command right now
Bpoplock:POP/IMAP mailbox locking...
Bgrplock:%0 is locked by another user at this time
; arrival messages
Nomail:No new mail
Newmail:New mail for %0
Newnews:%0 new articles
Newnews1:1 new article
Nonews:No new articles
; users
Uvacset:A vacation handler is now set for %0
Uvacfail:Couldn't set vacation handler for %0
Uvacdel:Deleted vacation handler for %0
Ubadvac:Sorry, you can't set a vacation for that user, as it is used in the "Special users..." setup.
Qkeep2:Couldn't retain outgoing file copy (couldn't create group %0, or no path for group)
Qtomax:Maximum number of recipients exceeded! Modify maxmail parameter.
AutoNoto:Can't send; no destination.
AutoNofrom:Can't send; no sender.
; transports
Tfail1:The "%0" transport failed to start (%1).
Tinit:Initializing "%0" transport. %1
Tfail3:Transport command failed.
Tfail4:Transport command "%0" not found.
Tbadop:Operation not supported by the %0 transport
Tnosetup:Sorry, the setup utility for this transport was not found.
Tnohelp:Sorry, no online help is available for this transport.
Tnogateway:The %0 transport has no %1 gateway defined. This may reduce %1 transmission efficiency or cause it to fail. Please review the instructions for this transport if you are not sure of the correct setting.
Tdefnews:Do you want to resubscribe your current active groups to the %0 transport?
;
Needmem1:Newsbase needs more memory.
Needmem2:Too little memory to run %0
Needdisk:The disk containing !Newsdir is almost full. Please make some space before continuing.
NoNewsdir:!Newsdir has disappeared or become inaccessible! Please fix this or shut me down.
Fulldir:Directory %0 is full.
Clfail:Default newsreader %0 not found
Clunreg:Unregistered client
Clfull:Too many newsbase clients
Nohost:Hostname is not set - please correct!
Cantsethost:Warning - Newsbase can't set your hostname from the %0 transport.
Grpinfo:Couldn't update the group information file!
Ndirfail:Failed to create !NewsDir
Badcom:Bad command
Noreader:No preferred newsreader configured.
InputInUse:Input window already in use.
BufFail:Can't claim memory buffer.
Nohelp:You need StrongHelp to view Newsbase's help files. A copy of StrongHelp should be available from the same place that you obtained the Newsbase archive.
; tcpip server messages
NNoff:Inactive
NNlis:Listening (port %0)
NNcon:Connections: %0/%1
Scrap:Couldn't open temporary file
OpenFail:Couldn't open that file for output.
Nopath:The file "%0" has no path. Drag to a filer window to save.
; NNTP server help text
NNH1:article [MessageID|Number]
NNH2:authinfo
NNH3:body [MessageID|Number]
NNH4:date
NNH5:group newsgroup
NNH6:head [MessageID|Number]
NNH7:help
NNH8:last
NNH9:list
NNH10:mode
NNH11:newgroups yymmdd hhmmss *
NNH12:newnews newsgroup yymmdd hhmmss *
NNH13:next
NNH14:post
NNH15:quit
NNH16:slave
NNH17:stat [MessageID|Number]
NNH18:xgtitle [group_pattern] *
NNH19:xover [range]
NNH20:xhdr *
NNH21:xpath [MessageID] *
NNH22:(* = partially implemented)
NBA1: nb-admin commands:
NBA2: user <user> log in as user
NBA3: pass <pass> verify login
NBA4: help list this message
NBA5: echo on|off enable/disable eventlog display
NBA6: show sessions show tcp/ip sessions
NBA7: show local show local sessions
NBA8: show vars show internal variables
NBA9: do <command> execute a newsbase command
NBA10: quit close admin session
NBA11: logout close admin session
SMTP1:214-Newsbase SMTP server.
SMTP2:214-
SMTP3:214-Supported commands are:
SMTP4:214 HELO EHLO MAIL RCPT DATA RSET SOML SAML HELP NOOP QUIT VRFY EXPN
